SN74LVC1G66DCKR

4.2ns, 5ns SPST - NO 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74LVC1G66 5 Pins 100nA 1.8V 5-TSSOP, SC-70-5, SOT-353

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LVC1G66DCKR
Package: 5-TSSOP, SC-70-5, SOT-353
Datasheet: -
Stock: 824
Description: 4.2ns, 5ns SPST - NO 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74LVC1G66 5 Pins 100nA 1.8V 5-TSSOP, SC-70-5, SOT-353(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	5-TSSOP, SC-70-5, SOT-353
Number of Pins	5
Weight	2.494758mg
Operating Temperature	-40°C~85°C TA
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
Termination	SMD/SMT
ECCN Code	EAR99
Resistance	10Ohm
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Base Part Number	74LVC1G66
Pin Count	5
Polarity	Non-Inverting
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Analog IC - Other Type	SPDT
Operating Supply Current	10μA
Nominal Supply Current	1μA
Output Current	50mA
Max Supply Current	10μA
Throw Configuration	SPST
Propagation Delay	600 ps
Turn On Delay Time	4.2 ns
Supply Type	Single
Bandwidth	300MHz
Turn-Off Delay Time	5 ns
-3db Bandwidth	300MHz
On-State Resistance (Max)	10Ohm
High Level Output Current	50mA
Low Level Output Current	50mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	58 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	6pF
On-state Resistance Match-Nom	12Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	4.2ns, 5ns
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.65V~5.5V
Max Junction Temperature (Tj)	150°C
Drain to Source Resistance	12Ohm
Normal Position	NC
Ambient Temperature Range High	85°C
On-State Resistance	5.5Ohm
Height	1.1mm
Length	2mm
Width	1.25mm
Thickness	900μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74LVC1G66DCKR Overview

The electronic part can be shipped overseas conveniently because it is packaged in 5-TSSOP, SC-70-5, SOT-353. High reliability is provided by advanced packaging method Cut Tape (CT). The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature extended to -40°C~85°C TA. A total of 5 terminations have been recorded. As a result of its 1 channels, this electronic component provides high-quality output. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. A total of 5 pins are injected into the electrical part body. Multiplexers built on a SPST - NO switching circuit are built. Search with 74LVC1G66 if you are looking for analog multiplexer variants. In this multiplexer, the internal resistance is 10Ohm. You can find the functions of the 5 pins in the datasheets. normally, users should not supply switches with voltages higher than 5.5V. The digital multiplexer has a low cost Single supply. The lowest voltage fed to the electronic component should be 1.65V. It would be sufficient to run this analogue multiplexer with 10μA current. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. A digital multiplexer may suffer damage if voltage is applied above 10μA. This product is integrated with an analog integrated circuit (IC) of type SPDT. This switch operates within the bandwidth of 300MHz. There is 12Ohm Drain to Source resistance on this electronic part.