banner_page

SN74LVC1G66YEAR

4.2ns, 5ns SPST - NO 10Ohm BOTTOM Analog Switches 5 Pins 100nA 2.3V 5-XFBGA, DSBGA


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-SN74LVC1G66YEAR
  • Package: 5-XFBGA, DSBGA
  • Datasheet: PDF
  • Stock: 967
  • Description: 4.2ns, 5ns SPST - NO 10Ohm BOTTOM Analog Switches 5 Pins 100nA 2.3V 5-XFBGA, DSBGA(Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 5-XFBGA, DSBGA
Surface Mount YES
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e0
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 5
Terminal Finish TIN LEAD
Technology CMOS
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.3V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 5
JESD-30 Code R-XBGA-B5
Supply Voltage-Max (Vsup) 5.5V
Number of Channels 1
Number of Circuits 1
-3db Bandwidth 300MHz
On-State Resistance (Max) 10Ohm
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 42 dB
Current - Leakage (IS(off)) (Max) 100nA
Channel Capacitance (CS(off), CD(off)) 6pF
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 4.2ns, 5ns
Switch-on Time-Max 6.5ns
Switch-off Time-Max 6.9ns
Voltage - Supply, Single (V+) 1.65V~5.5V
Height Seated (Max) 0.5mm
RoHS Status Non-RoHS Compliant

SN74LVC1G66YEAR Overview


Shipping overseas is convenient due to the electrical component's packing in 5-XFBGA, DSBGA. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, you'll find this switch device. 1:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. In total, there are 5 terminations. Due to its 1 channels, the electrical component produces high-quality output. In the case of a voltage supply of 2.3V volts, the electrical part can be powered up and run. As part of the design of the 5 series, this electronic part has been incorporated into the system. A SPST - NO switching circuit is used for these analog switches. There are 1 circuits in this multiplexer. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply.

SN74LVC1G66YEAR Features


1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 300MHz

SN74LVC1G66YEAR Applications


There are a lot of Rochester Electronics, LLC SN74LVC1G66YEAR Analog Switches & Multiplexers ICs applications.

  • SONET
  • Transmit
  • PBX interfaces
  • Battery-powered systems
  • Avionics test equipment
  • Audio signal routing
  • PDAs
  • HDTV
  • Cable PC
  • Cell phones

Write a review

Note: HTML is not translated!
    Bad           Good