SN74LVC1G79DCKTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC1G79 |
| Function | Standard |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Output Current | 32mA |
| Number of Bits | 1 |
| Clock Frequency | 160MHz |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Max I(ol) | 0.032 A |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC1G79DCKTG4 Overview
In the form of 5-TSSOP, SC-70-5, SOT-353, it has been packaged. The package Tape & Reel (TR)contains it. Currently, the output is configured to use Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. It is mounted in the way of Surface Mount. A voltage of 1.65V~5.5Vis required for its operation. The operating temperature is -40°C~125°C TA. This D latch has the type D-Type. FPGAs belonging to the 74LVCseries contain this type of chip. You should not exceed 160MHzin the output frequency of the device. It consumes 10μA of quiescent current without being affected by external factors. There have been 5 terminations. You can search similar parts based on 74LVC1G79. A voltage of 1.8V is used as the power supply for this D latch. JK flip flop input capacitance is 4pF farads. It belongs to the family of electronic devices known as LVC/LCX/Z. The electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 5 pins. The clock edge trigger type for this device is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. The flip flop is designed with 1bits. The superior flexibility of this circuit is achieved by using 1 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. An electrical current of 3.3V volts is applied to it. Its output current of 32mAallows for maximum design flexibility.
SN74LVC1G79DCKTG4 Features
Tape & Reel (TR) package
74LVC series
5 pins
1 Bits
3.3V power supplies
SN74LVC1G79DCKTG4 Applications
There are a lot of Texas Instruments SN74LVC1G79DCKTG4 Flip Flops applications.
- Balanced 24 mA output drivers
- Asynchronous counter
- Computing
- Parallel data storage
- Common Clocks
- Single Down Count-Control Line
- Guaranteed simultaneous switching noise level
- Frequency division
- Frequency Divider circuits
- Frequency Dividers
