SN74LVC1G79WDCKREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -55°C~115°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC1G79 |
| Function | Standard |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 160MHz |
| Propagation Delay | 10.1 ns |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 32mA 32mA |
| Max I(ol) | 0.032 A |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC1G79WDCKREP Overview
In the form of 5-TSSOP, SC-70-5, SOT-353, it has been packaged. D flip flop is included in the Tape & Reel (TR)package. There is a Non-Invertedoutput configured with it. It is configured with the trigger Positive Edge. Surface Mountis positioned in the way of this electronic part. It operates with a supply voltage of 1.65V~5.5V. The operating temperature is -55°C~115°C TA. D-Typeis the type of this D latch. It is a type of FPGA belonging to the 74LVC series. In order for it to function properly, its output frequency should not exceed 160MHz. As a result, it consumes 10μA quiescent current. It has been determined that there have been 5 terminations. D latch belongs to the 74LVC1G79 family. The power supply voltage is 1.8V. Input capacitance of this device is 4pF farads. It belongs to the family of electronic devices known as LVC/LCX/Z. This electronic part is mounted in the way of Surface Mount. This board is designed with 5pins on it. There is a clock edge trigger type of Positive Edgeon this device. The RS flip flops belongs to FF/Latches base part number. There are 1bits in this flip flop. The superior flexibility of this circuit is achieved by using 1 circuits. In view of its reliability, this D flip flop is a good fit for TR. It operates from 3.3V power supplies.
SN74LVC1G79WDCKREP Features
Tape & Reel (TR) package
74LVC series
5 pins
1 Bits
3.3V power supplies
SN74LVC1G79WDCKREP Applications
There are a lot of Texas Instruments SN74LVC1G79WDCKREP Flip Flops applications.
- Matched Rise and Fall
- Consumer
- QML qualified product
- Convert a momentary switch to a toggle switch
- Computing
- Latch
- Count Modes
- Data transfer
- Memory
- Computers
