SN74LVC1G80DBVRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 15.790684mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC1G80 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Inverted |
| Polarity | Inverting |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 160MHz |
| Propagation Delay | 5.2 ns |
| Turn On Delay Time | 1.1 ns |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Max I(ol) | 0.032 A |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC1G80DBVRG4 Overview
As a result, it is packaged as SC-74A, SOT-753. The package Tape & Reel (TR)contains it. T flip flop uses Invertedas its output configuration. In the configuration of the trigger, Positive Edgeis used. The electronic part is mounted in the way of Surface Mount. The supply voltage is set to 1.65V~5.5V. In the operating environment, the temperature is -40°C~125°C TA. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 74LVC series. This D flip flop should not have a frequency greater than 160MHz. During its operation, it consumes 10μA quiescent energy. There are 5 terminations,The object belongs to the 74LVC1G80 family. The D flip flop is powered by a voltage of 1.8V . The input capacitance of this JK flip flopis 3.5pF farads. It is a member of the LVC/LCX/Zfamily of D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 5. This device exhibits a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. It is designed with a number of bits of 1. The superior flexibility of this product is achieved by using 1 circuits. In view of its reliability, this D flip flop is a good fit for TR. It runs on 3.3Vvolts of power.
SN74LVC1G80DBVRG4 Features
Tape & Reel (TR) package
74LVC series
5 pins
1 Bits
3.3V power supplies
SN74LVC1G80DBVRG4 Applications
There are a lot of Texas Instruments SN74LVC1G80DBVRG4 Flip Flops applications.
- Consumer
- ESD performance
- Balanced Propagation Delays
- Computing
- Automotive
- Latch
- EMI reduction circuitry
- Bounce elimination switch
- Count Modes
- Common Clocks
