SN74LVC1G80DBVTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 15.790684mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC1G80 |
| Function | Standard |
| Output Type | Inverted |
| Polarity | Inverting |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 160MHz |
| Propagation Delay | 5.2 ns |
| Turn On Delay Time | 1.1 ns |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Max I(ol) | 0.032 A |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC1G80DBVTG4 Overview
It is packaged in the way of SC-74A, SOT-753. A package named Tape & Reel (TR)includes it. In the configuration, Invertedis used as the output. JK flip flop uses Positive Edgeas the trigger. There is an electronic component mounted in the way of Surface Mount. A voltage of 1.65V~5.5Vis required for its operation. It is operating at a temperature of -40°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 74LVC series. This D flip flop should not have a frequency greater than 160MHz. As a result, it consumes 10μA quiescent current and is not affected by external forces. The number of terminations is 5. The 74LVC1G80 family contains this object. It is powered by a voltage of 1.8V . The input capacitance of this T flip flop is 3.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. LVC/LCX/Zis the family of this D flip flop. There is an electronic part that is mounted in the way of Surface Mount. This board is designed with 5pins on it. This device has the clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. An electronic part with 1bits has been designed. Despite its superior flexibility, it relies on 1 circuits to achieve it. In light of its reliable performance, this T flip flop is well suited for TR. The power supply is 3.3V.
SN74LVC1G80DBVTG4 Features
Tape & Reel (TR) package
74LVC series
5 pins
1 Bits
3.3V power supplies
SN74LVC1G80DBVTG4 Applications
There are a lot of Texas Instruments SN74LVC1G80DBVTG4 Flip Flops applications.
- Automotive
- Load Control
- Shift registers
- Data transfer
- Cold spare funcion
- Supports Live Insertion
- Counters
- Individual Asynchronous Resets
- Buffered Clock
- Frequency Divider circuits
