SN74LVC1T45DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Weight | 6.492041mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.95mm |
| Base Part Number | 74LVC1T45 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 1.65V |
| Min Supply Voltage | 5.5mV |
| Number of Ports | 2 |
| Output Current | 32mA |
| Number of Bits | 1 |
| Propagation Delay | 3.9 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 36.2 ns |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 420Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -32mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 32mA |
| Control Type | COMMON CONTROL |
| Power Supply Current-Max (ICC) | 0.004mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.65V~5.5V |
| Voltage - VCCB | 1.65V~5.5V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC1T45DBVR Overview
There is an embedded version of it in package SOT-23-6.Level translators is packaged in the way of Tape & Reel (TR).This output uses Tri-State, Non-Inverted.There is Voltage Level translator type for this electrical device.The electronic part is mounted using the Surface Mount method.Level translators has the Channel type Bidirectional.Level translators operates at -40°C~85°C TA.To end a transmission line, there are 6 types of termination that can be used.Parts related to a base part number 74LVC1T45 are designated by the same number.Level translators is powered by a 1.8V supply.Pin count is 6.This device belongs to the 74LVC series.There are 6 pins on it.The design of this electronic part contains 1 bits.Level translators supports a maximum supply voltage of 1.65V.There is a minimum supply voltage of 5.5mV for it.The VCCA supply rail is configured from 1.65V~5.5V.VCCB is configured with a supply rail that starts at 1.65V~5.5V.Using the method of Surface Mount, this electronic component is mounted.There are a total of 1 channels.This part is included in Bus Driver/Transceivers.The logic IC it adopts is BUS TRANSCEIVER.In transmission lines, there are 2 terminations, which correspond to the characteristic impedance of the line.In terms of electronic devices, this one is in the LVC/LCX/Z family.Without external influence, it consumes 3μA of quiescent current.Powered by a 3.3V battery, it can run for an extended period of time.In view of its reliable performance, this device can be considered suitable for TR.Due to the 32mA output current, it provides maximum design flexibility.A configuration of 2 outputs has been set up for it.
SN74LVC1T45DBVR Features
SOT-23-6 package
6 pin count
74LVC series
6 pins
3.3V power supplies
2 outputs
SN74LVC1T45DBVR Applications
There are a lot of Texas Instruments SN74LVC1T45DBVR voltage translators & level shifters applications.
- Industrial equipment
- One Assembly and Test Site
- SDIO
- Monitors
- Desktop PC
- One Assembly
- Advanced Driver Assistance System (ADAS)
- I2C
- Power-sensitive applications
- MDIO
