SN74LVC1T45DCKRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC1T45 |
| Pin Count | 6 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 3.9 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 36.2 ns |
| Family | LVC/LCX/Z |
| Logic Function | Translator |
| Data Rate | 420Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.032 A |
| High Level Output Current | -32mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 32mA |
| Control Type | COMMON CONTROL |
| Power Supply Current-Max (ICC) | 0.004mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.65V~5.5V |
| Voltage - VCCB | 1.65V~5.5V |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC1T45DCKRE4 Overview
In the 6-TSSOP, SC-88, SOT-363 package, it is embedded.Tape & Reel (TR) is the way it is packaged.This output is configured with Tri-State, Non-Inverted.Level translators has the translator type Voltage Level.Surface Mount is the way in which this electronic part is mounted.There is Bidirectional channel type for this electrical device.Level translators operates at -40°C~85°C TA.Ending a transmission line involves 6 terminations.Parts that are related to 74LVC1T45 can be identified based on its base part number.The supply voltage of this device is 1.8V, and it is powered by it.There are 6 pins on it.There are a number of devices in the series 74LVC that belong to it.There are 6 pins on it.There are 1 bits in this electronic part, which means it is designed in such a way.5.5V is the maximum supply voltage it can handle.There is a minimum supply voltage of 1.65V for it.In the VCCA supply rail, 1.65V~5.5V is configured.1.65V~5.5V is the configuration of the VCCB supply rail.Surface Mount is used for mounting.There are a total of 1 channels.I would classify it as part of the group of Bus Driver/Transceivers.The logic IC it adopts is BUS TRANSCEIVER.2 terminations are the practice of terminating a transmission line with a device matching its characteristic impedance.This electronic device belongs to the family of LVC/LCX/Z.Aquiescent current is consumed by 3μA without being affected by external forces.This device runs on a 3.3V power supply.Based on its reliable performance, this device is suitable for TR.
SN74LVC1T45DCKRE4 Features
6-TSSOP, SC-88, SOT-363 package
6 pin count
74LVC series
6 pins
3.3V power supplies
SN74LVC1T45DCKRE4 Applications
There are a lot of Texas Instruments SN74LVC1T45DCKRE4 voltage translators & level shifters applications.
- I2C / SMBus
- Routers (routing equipment)
- SDIO
- One Assembly
- Motor Drives
- Products With Many I
- Controlled Baseline
- Routers (Telecom Switching Equipment)
- Debouncing a Mechanical Switch
- SMBus
