SN74LVC1T45DCKTE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC1T45 |
| Pin Count | 6 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 3.9 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 17.7 ns |
| Family | LVC/LCX/Z |
| Logic Function | Translator |
| Data Rate | 420Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.032 A |
| High Level Output Current | -32mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 32mA |
| Control Type | COMMON CONTROL |
| Power Supply Current-Max (ICC) | 0.004mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.65V~5.5V |
| Voltage - VCCB | 1.65V~5.5V |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC1T45DCKTE4 Overview
Package 6-TSSOP, SC-88, SOT-363 includes it.Tape & Reel (TR) is the way in which it is packaged.In this configuration, the output is set to Tri-State, Non-Inverted.The translator type of this electrical device is Voltage Level.A Surface Mount mounting method has been used for this electronic part.The Channel type of this electrical device is Bidirectional.The temperature used for operation is -40°C~85°C TA.As part of the transmission line termination process, there are a total of 6 terminations.The base part number 74LVC1T45 can be used to find its related parts.In order for it to operate, it needs to be powered by a voltage of 1.8V.A total of 6 pins are included.There are a number of devices in the series 74LVC that belong to it.6 pins are used in its design.Level translators is designed wLevel translatorsh 1 bLevel translatorss.The supply voltage is limited to 5.5V.There is a minimum supply voltage of 1.65V for it.In the VCCA supply rail, 1.65V~5.5V is configured.In the VCCB supply rail, 1.65V~5.5V is configured.This mount is done using the method of Surface Mount.1 is the number of channels available in the system.Level translators is part of Bus Driver/Transceivers.Logic ICs it uses are of the BUS TRANSCEIVER type.In transmission lines, there are 2 terminations, in which an impedance-matching device is used to end the line.Level translators is part of the family of electronic devices called LVC/LCX/Z.Level translators consumes 3μA of quiescent current wLevel translatorshout being affected by external factors. Power comes from a 3.3V supply.Based on its reliable performance, this device is suitable for TR.
SN74LVC1T45DCKTE4 Features
6-TSSOP, SC-88, SOT-363 package
6 pin count
74LVC series
6 pins
3.3V power supplies
SN74LVC1T45DCKTE4 Applications
There are a lot of Texas Instruments SN74LVC1T45DCKTE4 voltage translators & level shifters applications.
- Available in Military (–55°C/125°C) Temperature Range
- One Assembly
- Extended Product Life Cycle
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- Automotive
- PMBus
- Extended Product-Change Notification
- Infotainment Head Unit
- Debouncing a Mechanical Switch
- Product Traceability
