SN74LVC1T45DRLRG4
| Parameters | |
|---|---|
| Number of Pins | 6 |
| Weight | 2.806603mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVC1T45 |
| Pin Count | 6 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 3.9 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 17.7 ns |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 420Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.032 A |
| High Level Output Current | -32mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 32mA |
| Control Type | COMMON CONTROL |
| Power Supply Current-Max (ICC) | 0.004mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.65V~5.5V |
| Voltage - VCCB | 1.65V~5.5V |
| Height | 600μm |
| Length | 1.6mm |
| Width | 1.2mm |
| Thickness | 550μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-563, SOT-666 |
SN74LVC1T45DRLRG4 Overview
Level translators is embedded in the SOT-563, SOT-666 package.Tape & Reel (TR) is the packaging method.This output uses Tri-State, Non-Inverted.Its translator type is Voltage Level.Electronic parts are mounted using the Surface Mount method.Level translators has the Channel type Bidirectional.Operation is performed at -40°C~85°C TA.Transmission lines are terminated using 6 terminations.Parts that are related to 74LVC1T45 can be identified based on its base part number.Level translators is powered from a supply voltage of 1.8V.With 6 pins, it is equipped with a minimal number of connections.There are a number of devices in the series 74LVC that belong to it.In addition, it is designed with a pin number of 6.Level translators is designed wLevel translatorsh 1 bLevel translatorss.The maximum supply voltage is 5.5V.There is a minimum supply voltage of 1.65V for it.1.65V~5.5V is the supply rail configuration on the VCCA.In the VCCB, the supply rail is set to 1.65V~5.5V.This electronic part is mounted in the way of Surface Mount.There are no channels.Bus Driver/Transceivers contains this part.The logic IC it adopts is BUS TRANSCEIVER.2 terminations end transmission lines with devices that match their characteristic impedance, which can either be a resistance or an inductor.LVC/LCX/Z is the family of this electronic device.Level translators consumes 3μA of quiescent current wLevel translatorshout being affected by outside factors.A 3.3V power supply is required for it to operate.The reliability of this device indicates its suitability for TR as a result of its reliable performance.
SN74LVC1T45DRLRG4 Features
SOT-563, SOT-666 package
6 pin count
74LVC series
6 pins
3.3V power supplies
SN74LVC1T45DRLRG4 Applications
There are a lot of Texas Instruments SN74LVC1T45DRLRG4 voltage translators & level shifters applications.
- Debouncing a mechanical switch
- One Assembly
- Controlled Baseline
- Test Site
- Printers and Other Peripherals
- Personal Electronics
- Product Traceability
- Handset
- Debouncing a Mechanical Switch
- SDIO
