SN74LVC240APW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVC240 |
| Pin Count | 20 |
| Output Type | 3-State |
| Number of Elements | 2 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 9 ns |
| Family | LVC/LCX/Z |
| Logic Function | Buffer, Inverter |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Buffer, Inverting |
| Number of Bits per Element | 4 |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.01mA |
| Number of Input Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC240APW Overview
Logical driver uses a neat 20-TSSOP (0.173, 4.40mm Width) package. Tube external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Inverting logic prototype. Buffer IC is fed with a voltage of 1.65V~3.6V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74LVC series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 1.8V. This electronic component belongs to the LVC/LCX/Z family. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. You can search "74LVC240" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 10μA. It is recommended to use a 3.3V power supply. To supply the device, a minimum voltage of 1.65V is a must. Because of its 8 lines level input capability, buffer IC is more cost-effective on transimitting signals.
SN74LVC240APW Features
Bus Driver/Transceivers
SN74LVC240APW Applications
There are a lot of Texas Instruments SN74LVC240APW Buffers & Transceivers applications.
- Transmission stations
- 1x/2x Fiber Channel
- Single to Multimode Fiber Conversion
- Cable network front end
- Car radio
- Wired telephone
- Switches/bridges/routers/servers
- Wireless showroom
- Wireless communication
- Optical sub-assembly (OSA)
