SN74LVC244ADBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVC244 |
| Pin Count | 20 |
| Output Type | 3-State |
| Operating Supply Voltage | 3.6V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Ports | 2 |
| Power Dissipation | 500mW |
| Propagation Delay | 5.7 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 6.7 ns |
| Family | LVC/LCX/Z |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Buffer, Non-Inverting |
| Number of Gates | 8 |
| Number of Bits per Element | 4 |
| Control Type | ENABLE LOW |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC244ADBR Overview
Logical driver uses a neat 20-SSOP (0.209, 5.30mm Width) package. Cut Tape (CT) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 1.65V~3.6V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74LVC series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 1.8V. This logical driver is a member of the LVC/LCX/Z family. 20 pins are set with the electric part. Logical driver has 20 pins. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. You can search "74LVC244" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 1μA. It is generally sold in TR package. To run the part safely and stably in a circuit, 3.6V recommends users apply 3.6V on the logical driver. To supply the device, a minimum voltage of 1.65V is a must. Wireless transceiver is able to output 3 lines. Working with 8 logic gates.
SN74LVC244ADBR Features
Bus Driver/Transceivers
8 Logic Gates
SN74LVC244ADBR Applications
There are a lot of Texas Instruments SN74LVC244ADBR Buffers & Transceivers applications.
- Switching system
- Satellite radio receiver
- Wireless modems
- interconnection between switches
- Metro access rings
- Wireless transmission
- Transmission stations
- Digital systems
- Remote controls
- Changeing the frequency from IF to RF
