SN74LVC244APW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Bus Driver/Transceivers |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC244 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | 3-State |
| Operating Supply Voltage | 1.8V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Number of Ports | 2 |
| Nominal Supply Current | 1μA |
| Propagation Delay | 3.9 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 19.8 ns |
| Family | LVC/LCX/Z |
| Logic Function | Buffer, Inverting |
| Number of Inputs | 1 |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Buffer, Non-Inverting |
| Number of Bits per Element | 4 |
| Control Type | ENABLE LOW |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Max Junction Temperature (Tj) | 150°C |
| Ambient Temperature Range High | 125°C |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC244APW Overview
Logical driver uses a neat 20-TSSOP (0.173, 4.40mm Width) package. Tube external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 1.65V~3.6V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74LVC series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 1.8V. There is a LVC/LCX/Z family part that is attached to this electronic component. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. You can search "74LVC244" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 1μA. To run the part safely and stably in a circuit, 1.8V recommends users apply 1.8V on the logical driver. Wireless transceiver is able to output 3 lines. Digital buffer is characterized to have 1 inputs. The fundamental operation of logical driver is based on 8 circuits.
SN74LVC244APW Features
Bus Driver/Transceivers
SN74LVC244APW Applications
There are a lot of Texas Instruments SN74LVC244APW Buffers & Transceivers applications.
- Cell phones
- Wireless showroom
- Single to Multimode Fiber Conversion
- Cordless telephone
- Desktop radio
- Wired telephone
- Single fiber bidirectional application
- AV receiver
- Structural bonding
- TV signal transmission
