SN74LVC257ADRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Base Part Number | 74LVC257 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 4.6 ns |
| Family | LVC/LCX/Z |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC257ADRG4 Overview
Digital switch is provided in the 16-SOIC (0.154, 3.90mm Width) for the purpose of saving board space.In this case, it is packaged as Tape & Reel (TR).Mounting is performed using Surface Mount.the multiplexers uses IC Multiplexer as the analog IC.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 1.65V~3.6V.provides digital controlled switch's digital controlled switch'sThe multiplexers from 74LVC series can be used for a wide range of applications.As parts of its basic configuration, 16 terminations are desgined.Its logic switch base part number is 74LVC257 which can also be used to find its logic switch related parts.In this case, 3.3V is the voltage supplied to the multiplexer's system.In this turn signal switch, there are 16 components that can be connected to each pin.As a result, conductors end at GULL WING.The supply type of this multiplexer ic is Single.Currently, it is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.In the LVC/LCX/Z family, the logic switch is included.The multiplexer ic provides 2 bits.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.In order for 3.3V to operate normally, a power supply is provided.There are 1 outputs designed to operate the turn signal switch.This multiplexer is equipped with 8 inputs and 8 outputs.The switches package is packaged in a way which is consistent with TR.Transmission is carried out over 4 channels in the turn signal switch's circuit.
SN74LVC257ADRG4 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC257ADRG4 Applications
There are a lot of Texas Instruments SN74LVC257ADRG4 Signal Switches / Multiplexers / Decoders applications.
- Microprocessor input/output systems
- Seven segment displays
- Steel plants
- Small scale TV wall
- Memory chips
- Idle motor
- Enabling block of memory depending on address in memory chips
- CPU memory location identification
- Metal detectors
- Home automation system
