SN74LVC257AMPWREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Base Part Number | 74LVC257 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Number of Bits | 2 |
| Propagation Delay | 4.6 ns |
| Family | LVC/LCX/Z |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC257AMPWREP Overview
Due to the lack of space on the board, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).In this case, it is packaged as Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .the multiplexers uses an analog IC Multiplexer.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -55°C~125°C.With a supply voltage of 2V~3.6V, designers have greater flexibility of digital controlled switch.As a member of 74LVC series, the multiplexers can be used for a wide range of applications.It is designed with 16 terminations as part of its basic configuration.You can also find related parts by using its logic switch base part number of 74LVC257.The multiplexer's system is powered by 2.7V volts.A component pin count of 16 is found on this turn signal switch.GULL WING represents the end of conductors.There is a type of supply Single that is employed in this case.It is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch belongs to the family of LVC/LCX/Z.The multiplexer ic provides 2 bits.Keeping the minimum supply voltage (Vsup) at 2V prevents some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.There is a power supply provided for the mux switch's normal operation of 3.3V.The turn signal switch has 1 outputs designed for operation.There are 8 inputs provided in this multiplexer.The signal switching is packaged by TR. There are a total of 4 channels used for transmitting data in the turn signal switch's circuit.
SN74LVC257AMPWREP Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC257AMPWREP Applications
There are a lot of Texas Instruments SN74LVC257AMPWREP Signal Switches / Multiplexers / Decoders applications.
- Memory chips
- Decimal decoder
- Relay
- Electronics industry
- Arithmetic Logic Units
- Robotic vehicles
- A robotic vehicle with the metal detector
- HDMI applications
- Computer memory
- Home automation system
