SN74LVC257APWRG4
| Parameters | |
|---|---|
| Number of Bits | 2 |
| Propagation Delay | 4.6 ns |
| Family | LVC/LCX/Z |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Base Part Number | 74LVC257 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Channels | 4 |
SN74LVC257APWRG4 Overview
In order to save board space, digital switch is located in the 16-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.For the analog part of the multiplexers, an IC Multiplexer is used.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.When operated with a 1.65V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74LVC series are suitable for a wide range of applications.There is a design for terminating 16 as part of its basic configuration.You can also find related parts by using its logic switch base part number of 74LVC257.The voltage supplied for multiplexer's system is 3.3V.multiplexer's systemThis turn signal switch has a total of 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Its supply type is Single, which is used as the source of power.This multiplexer ic has 16 pins configured.The mounting point is Surface Mount.The logic switch belongs to the family of LVC/LCX/Z.There are 2 bits in signal multiplexer.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.mux switch's normal operation requires the power supply of 3.3V.In order for the turn signal switch to work, there are 1 outputs.It is provided with 8 inputs.In accordance with TR, switches can be packaged.There are a total of 4 channels used for transmitting data in the turn signal switch's circuit.
SN74LVC257APWRG4 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC257APWRG4 Applications
There are a lot of Texas Instruments SN74LVC257APWRG4 Signal Switches / Multiplexers / Decoders applications.
- Used to connect a single source to multiple destinations
- Home automation system
- Metal detectors
- Make full adder
- Analog, digital or video signal switching
- Encrypted communications system
- Automatic Monitoring systems
- GLAN
- Medical industry
- D/A converters
