SN74LVC2G53DCTR

4.5ns, 8ns SPDT 13Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74LVC2G53 8 Pins 100nA 2.3V 8-LSSOP, 8-MSOP (0.110, 2.80mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LVC2G53DCTR
Package: 8-LSSOP, 8-MSOP (0.110, 2.80mm Width)
Datasheet: -
Stock: 961
Description: 4.5ns, 8ns SPDT 13Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74LVC2G53 8 Pins 100nA 2.3V 8-LSSOP, 8-MSOP (0.110, 2.80mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-LSSOP, 8-MSOP (0.110, 2.80mm Width)
Number of Pins	8
Weight	23.388357mg
Operating Temperature	-40°C~85°C TA
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	13Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexers or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.3V
Terminal Pitch	0.65mm
Base Part Number	74LVC2G53
Output	COMMON OUTPUT
Pin Count	8
Polarity	Non-Inverting
Power Supplies	3.3V
Number of Channels	2
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Max Supply Current	1μA
Propagation Delay	600 ps
Turn On Delay Time	5.4 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	2
Supply Type	Single
Bandwidth	300MHz
Turn-Off Delay Time	8 ns
-3db Bandwidth	300MHz
On-State Resistance (Max)	13Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	10pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	4.5ns, 8ns
Channel-to-Channel Matching (ΔRon)	2 Ω (Max)
Crosstalk	-58dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	7.9ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Height	1.3mm
Length	2.95mm
Width	2.8mm
Thickness	1.29mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74LVC2G53DCTR Overview

The electrical component comes in 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) packaging, which makes it convenient to ship overseas. A high level of reliability can be achieved through the use of an advanced packaging method Cut Tape (CT). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Operating temperature extended to -40°C~85°C TA. 8 terminations have been made so far. By its 2 channels, the electronic component provides high-quality output. When a voltage supply of 2.3V is used, the electronic component should be turned on and run. An electrical component like this is included in the 8 series. Multiplexers built on a SPDT switching circuit are built. There are 1 circuits in this switch device. Try searching for 74LVC2G53 variants of the analog switch ic. There is 13Ohm internal resistance in this digital multiplexer. Datasheets for 8 pin functions are available upon request. It is a typical Multiplexers or Switches analog multiplexer. normally, users should not supply switches with voltages higher than 5.5V. A analog switch ic that has a cost-effective Single supply type. There should be 1.65V voltage fed to the electrical part below 1.65V. In order to operate this switch device, it would need a current of 1μA. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. A digital multiplexer may suffer damage if voltage is applied above 1μA. The analog switch ic utilizes COMMON OUTPUT outputs in total. In order to operate the 2 inputs, there are several steps to follow. This switch operates within the bandwidth of 300MHz.