SN74LVC2G53DCURG4

4.5ns, 8ns SPDT 13Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74LVC2G53 8 Pins 2.3V 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LVC2G53DCURG4
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: PDF
Stock: 238
Description: 4.5ns, 8ns SPDT 13Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74LVC2G53 8 Pins 2.3V 8-VFSOP (0.091, 2.30mm Width)(Kg)

Details

Tags

Parameters
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	1μA
Max Supply Current	100nA
Propagation Delay	600 ps
Turn On Delay Time	5.4 ns
Number of Inputs	2
Supply Type	Single
Bandwidth	300MHz
Turn-Off Delay Time	8 ns
-3db Bandwidth	300MHz
On-State Resistance (Max)	13Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	50 dB
Channel Capacitance (CS(off), CD(off))	10pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	4.5ns, 8ns
Channel-to-Channel Matching (ΔRon)	2 Ω (Max)
Crosstalk	-58dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	7.9ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Height	900μm
Length	2.3mm
Width	2mm
Thickness	850μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Weight	9.610488mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	13Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexers or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.3V
Terminal Pitch	0.5mm
Base Part Number	74LVC2G53
Output	COMMON OUTPUT
Pin Count	8
Power Supplies	3.3V
Number of Channels	2

SN74LVC2G53DCURG4 Overview

Shipping overseas is convenient due to the electrical component's packing in 8-VFSOP (0.091, 2.30mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. Totally, there are 8 terminations. By its 2 channels, the electronic component provides high-quality output. A 2.3V voltage supply should turn on and run the electronic component. The electronic part body is injected with 8 pins. These analog multiplexers are built based on SPDT switching circuits. 1 circuits are used in this analogue multiplexer. Try searching for 74LVC2G53 variants of the analog switch ic. The internal resistance of this digital multiplexer is 13Ohm. To find out what the functions of 8 pins are, please refer to their datasheets. Theswitch device is a typical Multiplexers or Switches. Multiplexers should not be powered above 5.5V in normal situations. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage the electronic part should receive is 1.65V. The switch device would be able to operate with 1μA current. This analog switch requires a voltage of 1.65V~5.5V to drain from a single voltage supply. If put voltage greater than 100nA on the device, damage may be caused to the analogue multiplexer. It is possible to use COMMON OUTPUT outputs on this digital multiplexer. A 2 input needs to be operated. There are various bandwidths available for data transfer.