SN74LVC2G66DCTR

3.9ns, 6.3ns SPST - NO 10Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74LVC2G66 8 Pins 100nA 2.3V 8-LSSOP, 8-MSOP (0.110, 2.80mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LVC2G66DCTR
Package: 8-LSSOP, 8-MSOP (0.110, 2.80mm Width)
Datasheet: -
Stock: 798
Description: 3.9ns, 6.3ns SPST - NO 10Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74LVC2G66 8 Pins 100nA 2.3V 8-LSSOP, 8-MSOP (0.110, 2.80mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Throw Configuration	SPST
Propagation Delay	600 ps
Turn On Delay Time	3.9 ns
Supply Type	Single
Bandwidth	300MHz
Turn-Off Delay Time	6.3 ns
-3db Bandwidth	300MHz
On-State Resistance (Max)	10Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	42 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	6pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	3.9ns, 6.3ns
Channel-to-Channel Matching (ΔRon)	2 Ω (Max)
Crosstalk	-58dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-on Time-Max	5.6ns
Switch-off Time-Max	6.9ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Drain to Source Resistance	12.5Ohm
Normal Position	NO
Height	1.3mm
Length	2.95mm
Width	2.8mm
Thickness	1.29mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-LSSOP, 8-MSOP (0.110, 2.80mm Width)
Number of Pins	8
Weight	23.388357mg
Operating Temperature	-40°C~85°C TA
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Termination	SMD/SMT
ECCN Code	EAR99
Resistance	10Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexers or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.3V
Terminal Pitch	0.65mm
Base Part Number	74LVC2G66
Pin Count	8
Polarity	Non-Inverting
Power Supplies	3.3V
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	10μA
Nominal Supply Current	1μA
Output Current	50mA
Max Supply Current	1μA

SN74LVC2G66DCTR Overview

The electronic part can be shipped overseas conveniently because it is packaged in 8-LSSOP, 8-MSOP (0.110, 2.80mm Width). The advanced packaging method Cut Tape (CT) provides high reliability. Multiplexers like this are mounted in the Surface Mount position. 1:1 is the number of circuits in the multiplexer and demultiplexer. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 8. A electrical component with 2 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 2.3V voltage supply. It is injected into the electrical part body with 8 pins. Multiplexers built on a SPST - NO switching circuit are built. 74LVC2G66 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 10Ohm. To find out what the 8 pins do, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexers or Switches. normally, users should not supply switches with voltages higher than 5.5V. An effective Single supply digital multiplexer. The lowest voltage the electronic part should receive is 1.65V. In order to operate this switch device, it would need a current of 10μA. Using a single voltage supply, this switch device consumes 1.65V~5.5V volts. The analogue multiplexer may be damaged if voltage is greater than 1μA. There are various bandwidths available for data transfer. Drain to Source resistance is 12.5Ohm.