SN74LVC2G66DCTRG4

3.9ns, 6.3ns SPST - NO 10Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74LVC2G66 8 Pins 100nA 2.3V 8-LSSOP, 8-MSOP (0.110, 2.80mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LVC2G66DCTRG4
Package: 8-LSSOP, 8-MSOP (0.110, 2.80mm Width)
Datasheet: -
Stock: 201
Description: 3.9ns, 6.3ns SPST - NO 10Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74LVC2G66 8 Pins 100nA 2.3V 8-LSSOP, 8-MSOP (0.110, 2.80mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-LSSOP, 8-MSOP (0.110, 2.80mm Width)
Number of Pins	8
Weight	23.388357mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	10Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexers or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.3V
Terminal Pitch	0.65mm
Base Part Number	74LVC2G66
Output	SEPARATE OUTPUT
Pin Count	8
Power Supplies	3.3V
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	10μA
Max Supply Current	10μA
Throw Configuration	SPST
Propagation Delay	600 ps
Turn On Delay Time	10 ns
Supply Type	Single
Bandwidth	300MHz
Turn-Off Delay Time	10.5 ns
-3db Bandwidth	300MHz
On-State Resistance (Max)	10Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	42 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	6pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	3.9ns, 6.3ns
Channel-to-Channel Matching (ΔRon)	2 Ω (Max)
Crosstalk	-58dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-on Time-Max	5.6ns
Switch-off Time-Max	6.9ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Normal Position	NO
Height	1.3mm
Length	2.95mm
Width	2.8mm
Thickness	1.29mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)

SN74LVC2G66DCTRG4 Overview

Shipping overseas is convenient with the electronic component packed in 8-LSSOP, 8-MSOP (0.110, 2.80mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~85°C TA. A total of 8 terminations have been recorded. High-quality output is provided by the electronic component's 2 channels. When the electronic component is given a voltage of 2.3V, it should be turned on and run. It is part of the design of the 8 series that this electronic component is included. Unlike digital switches, these are based on SPST - NO switching circuits. Look for analog switch ic variants by searching with 74LVC2G66. Analog switches have 10Ohm internal resistance. Datasheets for 8 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexers or Switches. normally, users should not supply switches with voltages higher than 5.5V. A analog switch ic that has a cost-effective Single supply type. 1.65V is the lowest voltage the electrical component should receive. The analogue multiplexer could operate on 10μA current. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. If you put voltage higher than 10μA on the digital multiplexer, damage may occur. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. The transfer of data can be performed over 300MHz bandwidths.