SN74LVC2G66DCUR

3.9ns, 6.3ns SPST - NO 10Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74LVC2G66 8 Pins 2.3V 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LVC2G66DCUR
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: -
Stock: 554
Description: 3.9ns, 6.3ns SPST - NO 10Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74LVC2G66 8 Pins 2.3V 8-VFSOP (0.091, 2.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Weight	9.610488mg
Operating Temperature	-40°C~85°C TA
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Termination	SMD/SMT
ECCN Code	EAR99
Resistance	10Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexers or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.3V
Terminal Pitch	0.5mm
Base Part Number	74LVC2G66
Pin Count	8
Polarity	Non-Inverting
Power Supplies	3.3V
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	10μA
Nominal Supply Current	1μA
Output Current	50mA
Max Supply Current	100nA
Throw Configuration	SPST
Propagation Delay	600 ps
Turn On Delay Time	3.9 ns
Supply Type	Single
Bandwidth	195MHz
Turn-Off Delay Time	6.3 ns
-3db Bandwidth	300MHz
On-State Resistance (Max)	10Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	42 dB
Channel Capacitance (CS(off), CD(off))	6pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	3.9ns, 6.3ns
Channel-to-Channel Matching (ΔRon)	2 Ω (Max)
Crosstalk	-58dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-on Time-Max	5.6ns
Switch-off Time-Max	6.9ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Drain to Source Resistance	12.5Ohm
Normal Position	NO
Height	900μm
Length	2.3mm
Width	2mm
Thickness	850μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74LVC2G66DCUR Overview

The electronic component is convenient to ship overseas because it is packed in a 8-VFSOP (0.091, 2.30mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Cut Tape (CT). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature extended to -40°C~85°C TA. A total of 8 terminations have been recorded. High-quality output is provided by the electronic component's 2 channels. With a 2.3V voltage supply, the electrical component should be turned on and run. An electrical component like this is included in the 8 series. On the other hand, analog switches can be constructed using SPST - NO switching circuits. If you are looking for variants of the digital switch, trying search with 74LVC2G66. It has an internal resistance of 10Ohm. For functions related to 8 pins, please refer to the datasheets. It is a typical Multiplexers or Switches analog multiplexer. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Digital switch that provides Single power at a cost-effective price. 1.65V is the lowest voltage the electrical component should receive. It would be sufficient to run this analogue multiplexer with 10μA current. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. Put voltage above 100nA on the multiplexer to cause damage. This switch operates within the bandwidth of 195MHz. There is 12.5Ohm resistance between Drain and Source for this electronic part.