SN74LVC2G66DCUTG4

3.9ns, 6.3ns SPST - NO 10Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74LVC2G66 8 Pins 100nA 2.3V 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LVC2G66DCUTG4
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: PDF
Stock: 703
Description: 3.9ns, 6.3ns SPST - NO 10Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74LVC2G66 8 Pins 100nA 2.3V 8-VFSOP (0.091, 2.30mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Weight	10.007382mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	10Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexers or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.3V
Terminal Pitch	0.5mm
Base Part Number	74LVC2G66
Output	SEPARATE OUTPUT
Pin Count	8
Power Supplies	3.3V
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	10μA
Max Supply Current	10μA
Throw Configuration	SPST
Propagation Delay	600 ps
Turn On Delay Time	10 ns
Supply Type	Single
Bandwidth	300MHz
Turn-Off Delay Time	10.5 ns
-3db Bandwidth	300MHz
On-State Resistance (Max)	10Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	42 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	6pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	3.9ns, 6.3ns
Channel-to-Channel Matching (ΔRon)	2 Ω (Max)
Crosstalk	-58dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-on Time-Max	5.6ns
Switch-off Time-Max	6.9ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Normal Position	NO
Height	900μm
Length	2.3mm
Width	2mm
Thickness	850μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74LVC2G66DCUTG4 Overview

Shipping overseas is convenient with the electronic component packed in 8-VFSOP (0.091, 2.30mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. In total, there are 8 terminations. The electronic part delivers high-quality output through its 2 channels. An 2.3V voltage supply should allow the electrical part to be turned on and run. The electronic part body is injected with 8 pins. Based on SPST - NO switching circuits, these analog multiplexers work. Try searching with 74LVC2G66 if you're looking for variants. The internal resistance of this digital multiplexer is 10Ohm. The functions of 8 pins can be found in the datasheets. The analogue multiplexer in this example is a typical Multiplexers or Switches. normally, users should not supply switches with voltages higher than 5.5V. A analog switch ic that has a cost-effective Single supply type. In order for the electronic part to function properly, the lowest voltage should be 1.65V. This multiplexer would work with 10μA current. This analog switch requires a voltage of 1.65V~5.5V to drain from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 10μA. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. The transfer of data can be performed over 300MHz bandwidths.