SN74LVC2G74DCTRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) |
| Number of Pins | 8 |
| Weight | 23.388357mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVC2G74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 200MHz |
| Propagation Delay | 14.4 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 4.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Number of Gates | 2 |
| Max Propagation Delay @ V, Max CL | 4.4ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 5.9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.3mm |
| Length | 2.95mm |
| Width | 2.8mm |
| Thickness | 1.29mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC2G74DCTRE4 Overview
The item is packaged in 8-LSSOP, 8-MSOP (0.110, 2.80mm Width)cases. D flip flop is included in the Tape & Reel (TR)package. Currently, the output is configured to use Differential. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at 1.65V~5.5Vvolts. -40°C~125°C TAis the operating temperature. It belongs to the type D-Typeof flip flops. This type of FPGA is a part of the 74LVC series. You should not exceed 200MHzin its output frequency. There are 8 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The object belongs to the 74LVC2G74 family. It is powered by a voltage of 1.8V . Its input capacitance is 5pF farads. An electronic device belonging to the family LVC/LCX/Zcan be found here. This electronic part is mounted in the way of Surface Mount. The 8pins are designed into the board. Its clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. There are 1bits in this flip flop. There is a 5.5Vmaximum supply voltage (Vsup). The superior flexibility is achieved through the use of 1 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. It operates from 3.3V power supplies. It consumes 10μA current. 2 gates are contained in its basic building block.
SN74LVC2G74DCTRE4 Features
Tape & Reel (TR) package
74LVC series
8 pins
1 Bits
3.3V power supplies
2 gates
SN74LVC2G74DCTRE4 Applications
There are a lot of Texas Instruments SN74LVC2G74DCTRE4 Flip Flops applications.
- Consumer
- Balanced Propagation Delays
- Test & Measurement
- ATE
- Computers
- CMOS Process
- Memory
- Bounce elimination switch
- Automotive
- Supports Live Insertion
