SN74LVC2G74DCTRE6
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVC2G74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Bits | 1 |
| Clock Frequency | 140MHz |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 32mA 32mA |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.032 A |
| Max Propagation Delay @ V, Max CL | 6.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Height | 1.3mm |
| Length | 2.95mm |
| Width | 2.8mm |
| Thickness | 1.29mm |
| RoHS Status | RoHS Compliant |
SN74LVC2G74DCTRE6 Overview
8-LSSOP, 8-MSOP (0.110, 2.80mm Width)is the way it is packaged. It is included in the package Tape & Reel (TR). T flip flop uses Differentialas the output. In the configuration of the trigger, Positive Edgeis used. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 1.65V~5.5V. It is operating at -40°C~125°C TA. D-Typeis the type of this D latch. JK flip flop belongs to the 74LVCseries of FPGAs. It should not exceed 140MHzin its output frequency. In total, it contains 1 elements. As a result, it consumes 10μA of quiescent current without being affected by external factors. In 8terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. You can search similar parts based on 74LVC2G74. Power is supplied from a voltage of 3.3V volts. This JK flip flop has a 5pFfarad input capacitance. The electronic device belongs to the LVC/LCX/Zfamily. There is an electronic part that is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 8. An electronic part designed with 1bits is used in this application. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached.
SN74LVC2G74DCTRE6 Features
Tape & Reel (TR) package
74LVC series
8 pins
1 Bits
SN74LVC2G74DCTRE6 Applications
There are a lot of Texas Instruments SN74LVC2G74DCTRE6 Flip Flops applications.
- Storage registers
- 2 – Bit synchronous counter
- EMI reduction circuitry
- High Performance Logic for test systems
- Storage Registers
- Memory
- Data transfer
- Matched Rise and Fall
- Shift Registers
- Asynchronous counter
