SN74LVC2G74DCTRG4
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVC2G74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 140MHz |
| Propagation Delay | 6.2 ns |
| Turn On Delay Time | 4.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Number of Gates | 2 |
| Max Propagation Delay @ V, Max CL | 5.1ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 5.9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.3mm |
| Length | 2.95mm |
| Width | 2.8mm |
| Thickness | 1.29mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) |
| Number of Pins | 8 |
| Weight | 23.388357mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
SN74LVC2G74DCTRG4 Overview
As a result, it is packaged as 8-LSSOP, 8-MSOP (0.110, 2.80mm Width). A package named Tape & Reel (TR)includes it. T flip flop uses Differentialas its output configuration. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. A voltage of 1.65V~5.5Vis required for its operation. It is at -40°C~125°C TAdegrees Celsius that the system is operating. It is an electronic flip flop with the type D-Type. In FPGA terms, D flip flop is a type of 74LVCseries FPGA. You should not exceed 140MHzin the output frequency of the device. As a result, it consumes 10μA quiescent current and is not affected by external forces. There have been 8 terminations. If you search by 74LVC2G74, you will find similar parts. The power source is powered by 1.8V. Its input capacitance is 5pF farads. This D flip flop belongs to the family of LVC/LCX/Z. There is an electronic component mounted in the way of Surface Mount. As you can see from the design, it has pins with 8. This device has the clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. Flip flops designed with 1bits are used in this part. 5.5Vis the maximum supply voltage (Vsup). The superior flexibility of this circuit is achieved by using 1 circuits. As a result of its reliable performance, this T flip flop is suitable for TR. An electrical current of 3.3V volts is applied to it. There are 2 gates in its basic building block.
SN74LVC2G74DCTRG4 Features
Tape & Reel (TR) package
74LVC series
8 pins
1 Bits
3.3V power supplies
2 gates
SN74LVC2G74DCTRG4 Applications
There are a lot of Texas Instruments SN74LVC2G74DCTRG4 Flip Flops applications.
- Storage Registers
- Single Up Count-Control Line
- Bounce elimination switch
- Matched Rise and Fall
- Parallel data storage
- Buffered Clock
- Shift Registers
- Convert a momentary switch to a toggle switch
- Communications
- Modulo – n – counter
