SN74LVC2G74DCUR
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVC2G74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Nominal Supply Current | 10μA |
| Output Current | 32mA |
| Number of Bits | 1 |
| Clock Frequency | 200MHz |
| Propagation Delay | 6.1 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 4.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type |
| Number of Inputs | 1 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Number of Gates | 2 |
| Max Propagation Delay @ V, Max CL | 4.4ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 5.9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Clock Edge Trigger Type | Positive Edge |
| Ambient Temperature Range High | 125°C |
| Height | 900μm |
| Length | 2.3mm |
| Width | 2mm |
| Thickness | 850μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Weight | 9.610488mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
SN74LVC2G74DCUR Overview
The package is in the form of 8-VFSOP (0.091, 2.30mm Width). Package Tape & Reel (TR)embeds it. As configured, the output uses Differential. The trigger it is configured with uses Positive Edge. It is mounted in the way of Surface Mount. Powered by a 1.65V~5.5Vvolt supply, it operates as follows. -40°C~125°C TAis the operating temperature. This electronic flip flop is of type D-Type. JK flip flop is a part of the 74LVCseries of FPGAs. A frequency of 200MHzshould not be exceeded by its output. Currently, there are 8 terminations. JK flip flop belongs to 74LVC2G74 family. It is powered by a voltage of 1.8V . This T flip flop has a capacitance of 5pF farads at the input. In this case, the D flip flop belongs to the LVC/LCX/Zfamily. A part of the electronic system is mounted in the way of Surface Mount. This board is designed with 8pins on it. A Positive Edgeclock edge trigger is used in this device. It is part of the FF/Latchesbase part number family. Flip flops designed with 1bits are used in this part. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). In view of its reliability, this D flip flop is a good fit for TR. In order for the device to operate, it requires 3.3V power supplies. Its output current of 32mAallows for maximum design flexibility. It consumes 10μA current. There are 2 gates in its basic building block. D flip flop includes 1 inpits.
SN74LVC2G74DCUR Features
Tape & Reel (TR) package
74LVC series
8 pins
1 Bits
3.3V power supplies
2 gates
SN74LVC2G74DCUR Applications
There are a lot of Texas Instruments SN74LVC2G74DCUR Flip Flops applications.
- Circuit Design
- Shift registers
- Storage registers
- ESCC
- Modulo – n – counter
- Individual Asynchronous Resets
- Clock pulse
- Test & Measurement
- Pattern generators
- High Performance Logic for test systems
