SN74LVC2G74YEPR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-XFBGA, DSBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-XBGA-B8 |
| Function | Set(Preset) and Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Bits | 1 |
| Clock Frequency | 140MHz |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Output Polarity | COMPLEMENTARY |
| Max Propagation Delay @ V, Max CL | 5.4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| fmax-Min | 200 MHz |
| Height Seated (Max) | 0.5mm |
| Width | 0.9mm |
| RoHS Status | Non-RoHS Compliant |
SN74LVC2G74YEPR Overview
The flip flop is packaged in a case of 8-XFBGA, DSBGA. Package Tape & Reel (TR)embeds it. There is a Differentialoutput configured with it. The trigger it is configured with uses Positive Edge. It is mounted in the way of Surface Mount. A voltage of 1.65V~5.5Vis required for its operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This logic flip flop is classified as type D-Type. In FPGA terms, D flip flop is a type of 74LVCseries FPGA. A frequency of 140MHzshould not be exceeded by its output. The element count is 1 . It consumes 10μA of quiescent current without being affected by external factors. Terminations are 8. A voltage of 1.8V provides power to the D latch. A JK flip flop with a 5pFfarad input capacitance is used here. Electronic devices of this type belong to the LVC/LCX/Zfamily. An electronic part designed with 1bits is used in this application. Vsup reaches 5.5V, the maximal supply voltage.
SN74LVC2G74YEPR Features
Tape & Reel (TR) package
74LVC series
1 Bits
SN74LVC2G74YEPR Applications
There are a lot of Rochester Electronics, LLC SN74LVC2G74YEPR Flip Flops applications.
- Guaranteed simultaneous switching noise level
- Dynamic threshold performance
- Digital electronics systems
- Frequency division
- Buffer registers
- Asynchronous counter
- Consumer
- Modulo – n – counter
- EMI reduction circuitry
- Balanced 24 mA output drivers
