SN74LVC2G74YZAR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFBGA, DSBGA |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC2G74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 140MHz |
| Propagation Delay | 6.2 ns |
| Turn On Delay Time | 4.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 5.4ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 5.9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| fmax-Min | 200 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 0.5mm |
| Width | 0.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC2G74YZAR Overview
It is packaged in the way of 8-XFBGA, DSBGA. It is contained within the Cut Tape (CT)package. T flip flop uses Differentialas the output. Positive Edgeis the trigger it is configured with. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at 1.65V~5.5Vvolts. In this case, the operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. It belongs to the 74LVCseries of FPGAs. It should not exceed 140MHzin its output frequency. As a result, it consumes 10μA quiescent current and is not affected by external forces. A total of 8 terminations have been made. If you search by 74LVC2G74, you will find similar parts. The power supply voltage is 1.8V. There is 5pF input capacitance for this T flip flop. A device of this type belongs to the family of LVC/LCX/Z. It is mounted in the way of Surface Mount. With its 8pins, it is designed to work with most electronic flip flops. This device has Positive Edgeas its clock edge trigger type. This RS flip flops is a part number FF/Latches. This flip flop is designed with 1 Bits. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. Using 1 circuits, it is highly flexible. The power supply is 3.3V.
SN74LVC2G74YZAR Features
Cut Tape (CT) package
74LVC series
8 pins
1 Bits
3.3V power supplies
SN74LVC2G74YZAR Applications
There are a lot of Texas Instruments SN74LVC2G74YZAR Flip Flops applications.
- Patented noise
- Load Control
- Clock pulse
- Buffer registers
- Control circuits
- ESD performance
- Memory
- Data Synchronizers
- Safety Clamp
- Memory
