SN74LVC2G74YZPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFBGA, DSBGA |
| Number of Pins | 8 |
| Weight | 2.296311mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVC2G74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 140MHz |
| Propagation Delay | 14.4 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 4.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Number of Gates | 2 |
| Max Propagation Delay @ V, Max CL | 5.4ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 5.9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 500μm |
| Length | 1.25mm |
| Width | 2.25mm |
| Thickness | 310μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC2G74YZPR Overview
The flip flop is packaged in 8-XFBGA, DSBGA. D flip flop is included in the Cut Tape (CT)package. In the configuration, Differentialis used as the output. Positive Edgeis the trigger it is configured with. Surface Mountis positioned in the way of this electronic part. A voltage of 1.65V~5.5Vis required for its operation. In the operating environment, the temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. This type of FPGA is a part of the 74LVC series. It should not exceed 140MHzin terms of its output frequency. In 8terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74LVC2G74 family contains it. Power is provided by a 1.8V supply. Input capacitance of this device is 5pF farads. It belongs to the family of electronic devices known as LVC/LCX/Z. In this case, the electronic component is mounted in the way of Surface Mount. There are 8pins on it. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latches. This flip flop is designed with 1 Bits. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). Using 1 circuits, it is highly flexible. Considering its reliability, this T flip flop is well suited for TR. It operates from 3.3V power supplies. It consumes 10μA of quiescent current without being affected by external factors. There are 2 gates in its basic building block.
SN74LVC2G74YZPR Features
Cut Tape (CT) package
74LVC series
8 pins
1 Bits
3.3V power supplies
2 gates
SN74LVC2G74YZPR Applications
There are a lot of Texas Instruments SN74LVC2G74YZPR Flip Flops applications.
- Data storage
- Memory
- Frequency Divider circuits
- Registers
- Event Detectors
- Memory
- Dynamic threshold performance
- Single Down Count-Control Line
- Safety Clamp
- ESD performance
