SN74LVC2G79DCTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) |
| Number of Pins | 8 |
| Weight | 23.388357mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC2G79 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 160MHz |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 5μA |
| Turn On Delay Time | 1.1 ns |
| Family | LVC/LCX/Z |
| Current - Output High, Low | 32mA 32mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 0.005mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.3mm |
| Length | 2.95mm |
| Width | 2.8mm |
| Thickness | 1.29mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC2G79DCTR Overview
It is embeded in 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) case. There is an embedded version in the package Tape & Reel (TR). T flip flop is configured with an output of Non-Inverted. There is a trigger configured with Positive Edge. There is an electronic component mounted in the way of Surface Mount. A supply voltage of 1.65V~5.5V is required for operation. -40°C~125°C TAis the operating temperature. This electronic flip flop is of type D-Type. FPGAs belonging to the 74LVCseries contain this type of chip. Its output frequency should not exceed 160MHz Hz. A total of 8terminations have been recorded. The 74LVC2G79 family contains it. Power is provided by a 1.8V supply. Its input capacitance is 3.5pF farads. In this case, the D flip flop belongs to the LVC/LCX/Zfamily. The electronic part is mounted in the way of Surface Mount. 8pins are included in its design. Its clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. Vsup reaches 5.5V, the maximal supply voltage. In order to achieve its superior flexibility, 2 circuits are used. On the basis of its reliable performance, this D flip flop is well suited for use with TR. The system runs on a power supply of 3.3V watts. There are 1 output lines on it. In terms of quiescent current, it consumes 5μA .
SN74LVC2G79DCTR Features
Tape & Reel (TR) package
74LVC series
8 pins
3.3V power supplies
SN74LVC2G79DCTR Applications
There are a lot of Texas Instruments SN74LVC2G79DCTR Flip Flops applications.
- Data transfer
- Communications
- Load Control
- QML qualified product
- Matched Rise and Fall
- 2 – Bit synchronous counter
- Buffered Clock
- Single Down Count-Control Line
- Instrumentation
- Patented noise
