SN74LVC2G79DCUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Weight | 9.610488mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVC2G79 |
| Function | Standard |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 32mA |
| Clock Frequency | 160MHz |
| Propagation Delay | 3.7 ns |
| Turn On Delay Time | 1.1 ns |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 5μA |
| Current - Output High, Low | 32mA 32mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 0.005mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 900μm |
| Length | 2.3mm |
| Width | 2mm |
| Thickness | 850μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC2G79DCUR Overview
It is packaged in the way of 8-VFSOP (0.091, 2.30mm Width). D flip flop is embedded in the Tape & Reel (TR) package. Non-Invertedis the output configured for it. The trigger configured with it uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. A voltage of 1.65V~5.5Vis required for its operation. In this case, the operating temperature is -40°C~125°C TA. It belongs to the type D-Typeof flip flops. This type of FPGA is a part of the 74LVC series. This D flip flop should not have a frequency greater than 160MHz. As a result, it consumes 5μA quiescent current and is not affected by external forces. In 8terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. Members of the 74LVC2G79family make up this object. The D flip flop is powered by a voltage of 1.8V . A 3.5pFfarad input capacitance is provided by this T flip flop. Devices in the LVC/LCX/Zfamily are electronic devices. This electronic part is mounted in the way of Surface Mount. It is designed with 8 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This device is part of the FF/Latchesbase part number family. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). To achieve this superior flexibility, 2 circuits are used. Due to its reliability, this T flip flop is well suited for TR. The power supply is 3.3V. This T flip flop features a maximum design flexibility due to its output current of 32mA. There are no output lines on the JK flip flop.
SN74LVC2G79DCUR Features
Tape & Reel (TR) package
74LVC series
8 pins
3.3V power supplies
SN74LVC2G79DCUR Applications
There are a lot of Texas Instruments SN74LVC2G79DCUR Flip Flops applications.
- ESCC
- Registers
- CMOS Process
- Computing
- Dynamic threshold performance
- Computers
- ESD protection
- Individual Asynchronous Resets
- Synchronous counter
- High Performance Logic for test systems
