SN74LVC2G79DCURE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Weight | 9.610488mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC2G79 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 160MHz |
| Propagation Delay | 5.2 ns |
| Turn On Delay Time | 1.1 ns |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 5μA |
| Current - Output High, Low | 32mA 32mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 0.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LVC2G79DCURE4 Overview
The flip flop is packaged in 8-VFSOP (0.091, 2.30mm Width). Package Tape & Reel (TR)embeds it. T flip flop uses Non-Invertedas the output. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. A supply voltage of 1.65V~5.5V is required for operation. The operating temperature is -40°C~125°C TA. It belongs to the type D-Typeof flip flops. It belongs to the 74LVCseries of FPGAs. Its output frequency should not exceed 160MHz. It consumes 5μA of quiescent current without being affected by external factors. Currently, there are 8 terminations. The object belongs to the 74LVC2G79 family. It is powered from a supply voltage of 1.8V. Input capacitance of this device is 3.5pF farads. LVC/LCX/Zis the family of this D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. The 8pins are designed into the board. The clock edge trigger type for this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Vsup reaches 5.5V, the maximal supply voltage. Its flexibility is enhanced by 2 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. There are 3.3V power supplies attached to it. It is designed with 1 output lines.
SN74LVC2G79DCURE4 Features
Tape & Reel (TR) package
74LVC series
8 pins
3.3V power supplies
SN74LVC2G79DCURE4 Applications
There are a lot of Texas Instruments SN74LVC2G79DCURE4 Flip Flops applications.
- Asynchronous counter
- High Performance Logic for test systems
- Buffer registers
- Safety Clamp
- Reduced system switching noise
- ESD protection
- Differential Individual
- Circuit Design
- Data storage
- Memory
