SN74LVC2G80DCTR
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC2G80 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Inverted |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 160MHz |
| Propagation Delay | 5.2 ns |
| Turn On Delay Time | 1.1 ns |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 5μA |
| Current - Output High, Low | 32mA 32mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 0.005mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.3mm |
| Length | 2.95mm |
| Width | 2.8mm |
| Thickness | 1.29mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) |
| Number of Pins | 8 |
| Weight | 23.388357mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
SN74LVC2G80DCTR Overview
8-LSSOP, 8-MSOP (0.110, 2.80mm Width)is the packaging method. There is an embedded version in the package Tape & Reel (TR). There is a Invertedoutput configured with it. This trigger uses the value Positive Edge. It is mounted in the way of Surface Mount. With a supply voltage of 1.65V~5.5V volts, it operates. A temperature of -40°C~125°C TAis considered to be the operating temperature. It is an electronic flip flop with the type D-Type. The FPGA belongs to the 74LVC series. A frequency of 160MHzshould be the maximum output frequency. Despite external influences, it consumes 5μAof quiescent current. A total of 8terminations have been recorded. The object belongs to the 74LVC2G80 family. The D flip flop is powered by a voltage of 1.8V . The input capacitance of this T flip flop is 3.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. An electronic device belonging to the family LVC/LCX/Zcan be found here. Electronic part Surface Mountis mounted in the way. With its 8pins, it is designed to work with most electronic flip flops. This device has the clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. Using 2 circuits, it is highly flexible. As a result of its reliability, this D flip flop is ideally suited for TR. In order for the device to operate, it requires 3.3V power supplies. There are no output lines on the JK flip flop.
SN74LVC2G80DCTR Features
Tape & Reel (TR) package
74LVC series
8 pins
3.3V power supplies
SN74LVC2G80DCTR Applications
There are a lot of Texas Instruments SN74LVC2G80DCTR Flip Flops applications.
- Guaranteed simultaneous switching noise level
- Individual Asynchronous Resets
- Computing
- Synchronous counter
- Latch-up performance
- Bounce elimination switch
- Shift registers
- Buffer registers
- Parallel data storage
- Divide a clock signal by 2 or 4
