SN74LVC2T45DCURG4

Surface Mount 8 pinsTape & Reel (TR) Voltage Translators & Level Shifters 1 Voltage Level 8-VFSOP (0.091, 2.30mm Width) Active 6 Weeks Weeks1 (Unlimited)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LVC2T45DCURG4
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: PDF
Stock: 524
Description: Surface Mount 8 pinsTape & Reel (TR) Voltage Translators & Level Shifters 1 Voltage Level 8-VFSOP (0.091, 2.30mm Width) Active 6 Weeks Weeks1 (Unlimited) (Kg)

Inquiry Now

Details

Tags

Parameters
Height	900μm
Length	2.3mm
Width	2mm
Thickness	850μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Surface Mount	YES
Number of Pins	8
Weight	9.610488mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Series	74LVC
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	TWO SEPARATE CONFIGURABLE POWER SUPPLY FOR PORT A AND PORT B
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	74LVC2T45
Pin Count	8
Output Type	Tri-State, Non-Inverted
Polarity	Non-Inverting
Power Supplies	3.3V
Number of Channels	2
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Number of Ports	2
Output Current	32mA
Number of Bits	2
Propagation Delay	3.5 ns
Quiescent Current	3μA
Turn On Delay Time	45.2 ns
Family	LVC/LCX/Z
Logic Function	Transceiver, Translator
Data Rate	420Mbps
Output Characteristics	3-STATE
Logic IC Type	BUS TRANSCEIVER
High Level Output Current	-32mA
Channel Type	Bidirectional
Low Level Output Current	32mA
Control Type	COMMON CONTROL
Power Supply Current-Max (ICC)	0.004mA
Translation	N/A
Translator Type	Voltage Level
Voltage - VCCA	1.65V~5.5V
Voltage - VCCB	1.65V~5.5V

SN74LVC2T45DCURG4 Overview

There is an embedded version of it in package 8-VFSOP (0.091, 2.30mm Width).Tape & Reel (TR) is the packaging method.Tri-State, Non-Inverted is used for the output it is configured with.This electrical device has a translator type of Voltage Level.The electronic part is mounted in a way that corresponds to Surface Mount.There is Bidirectional channel type for this electrical device.There is -40°C~85°C TA operating temperature.The superior flexibility of the system is achieved through its use of 1 circuits.Transmission lines are terminated using 8 terminations.A series of related parts can be derived from the base part number 74LVC2T45.The supply voltage of this device is 1.8V, and it is powered by it.With 8 pins, it is equipped with a minimal number of connections.Level translators is a type of FPGA belonging to the 74LVC series.There are 8 pins on it.An electronic part with 2 bits is designed.The supply voltage is limited to 5.5V.1.65V is its minimum supply voltage.There is a configuration of 1.65V~5.5V for the VCCA supply rail.The VCCB supply rail is configured from 1.65V~5.5V.There are no channels.Bus Driver/Transceivers contains this part.As for the logic IC it uses, it is a BUS TRANSCEIVER.2 terminations are possible, which each match the transmission line's characteristic impedance.Despite the fact that it is an electronic device, it belongs to the LVC/LCX/Z family.In the absence of external influences, it consumes 3μA of quiescent current.3.3V power supplies are required to run it.The device's reliable performance makes it a good choice for TR.The output current of 32mA gives it maximum flexibility in design.There are also TWO SEPARATE CONFIGURABLE POWER SUPPLY FOR PORT A AND PORT B characteristics.