SN74LVC2T45DCUTE4

Surface Mount 8 pinsTape & Reel (TR) Voltage Translators & Level Shifters 1 Voltage Level 8-VFSOP (0.091, 2.30mm Width) Discontinued 1 (Unlimited)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LVC2T45DCUTE4
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: PDF
Stock: 278
Description: Surface Mount 8 pinsTape & Reel (TR) Voltage Translators & Level Shifters 1 Voltage Level 8-VFSOP (0.091, 2.30mm Width) Discontinued 1 (Unlimited) (Kg)

Inquiry Now

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Surface Mount	YES
Number of Pins	8
Weight	9.610488mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Series	74LVC
JESD-609 Code	e4
Pbfree Code	no
Part Status	Discontinued
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	TWO SEPARATE CONFIGURABLE POWER SUPPLY FOR PORT A AND PORT B
Subcategory	Bus Driver/Transceivers
Packing Method	TAPE AND REEL
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	74LVC2T45
Pin Count	8
Output Type	Tri-State, Non-Inverted
Polarity	Non-Inverting
Power Supplies	3.3V
Number of Channels	2
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Number of Ports	2
Output Current	32mA
Number of Bits	2
Propagation Delay	3.5 ns
Quiescent Current	3μA
Turn On Delay Time	45.2 ns
Family	LVC/LCX/Z
Logic Function	Transceiver, Translator
Data Rate	420Mbps
Output Characteristics	3-STATE
Logic IC Type	BUS TRANSCEIVER
High Level Output Current	-32mA
Channel Type	Bidirectional
Low Level Output Current	32mA
Control Type	COMMON CONTROL
Translation	N/A
Translator Type	Voltage Level
Voltage - VCCA	1.65V~5.5V
Voltage - VCCB	1.65V~5.5V
Height Seated (Max)	0.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

SN74LVC2T45DCUTE4 Overview

Level translators is embedded in the 8-VFSOP (0.091, 2.30mm Width) package.Tape & Reel (TR) is the packaging method.In its configuration, Tri-State, Non-Inverted is used as the output.Level translators is the Voltage Level type of translator that is used in this electrical device.Surface Mount is the way in which this electronic part is mounted.There is Bidirectional channel type for this electrical device.-40°C~85°C TA is the operating temperature.Flexible 1 circuits enable it to achieve high performance.0 terminations are used to end transmission lines.Parts that are related to 74LVC2T45 can be identified based on its base part number.In order to power the device, a voltage supply of 1.8V is required.Level translators is equipped wLevel translatorsh 8 pin count.This is a device from the 74LVC series.The pin configuration of the device is 8.The design of this electronic part contains 2 bits.Voltages up to 5.5V can be supplied.A minimal voltage of 1.65V is needed to operate it.A VCCA supply rail is configured as 1.65V~5.5V.VCCB is configured with a supply rail that starts at 1.65V~5.5V.2 is the number of channels available in the system.Level translators belongs to the group of Bus Driver/Transceivers.Logic ICs it uses are of the BUS TRANSCEIVER type.2 terminations are the practice of terminating a transmission line with a device matching its characteristic impedance.Level translators is a member of the LVC/LCX/Z family of electronic devices.Without external influence, it consumes 3μA of quiescent current.A 3.3V power supply is required for it to operate.This device has been rated to be suitable for TAPE AND REEL based upon the reliability of its performance.If the supply voltage is kept at 32mA, a high level of efficiency can be achieved.TWO SEPARATE CONFIGURABLE POWER SUPPLY FOR PORT A AND PORT B are also a characteristics of it.