SN74LVC373ADBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Number of Input Lines | 2 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC373ADBR Overview
There is an embedded version of it in package 20-SSOP (0.209, 5.30mm Width). The package is in the form of Cut Tape (CT). Tri-State is the output configured for it. There is D-Type Transparent Latch logic type for this electrical device. Electronic components are mounted using the Surface Mount method. There is no supply voltage for this device. It is -40°C~85°C at the operating temperature. There are a number of FPGAs in this series, including this one. It is designed with 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. It belongs to 74LVC373 family. With the supply voltage set at 1.8V, it is able to operate. The device is equipped with 20 pins. It is part of the family of electronic devices called LVC/LCX/Z. The 20 pins are designed into it. It is mounted according to the Surface Mount method. In this device, there is a total of 2 ports available for use. This part is included in FF/Latches. It is possible to reach 3.6V when the maximum supply voltage (Vsup) has been reached. The device is powered by 3.3V power supplies. In the circuit, there are 2 input lines that are constituted by an electronic circuit. Based on its reliable performance, this device is suitable for TR. Due to its 24mA output current, it offers maximum design flexibility.
SN74LVC373ADBR Features
20-SSOP (0.209, 5.30mm Width) package
74LVC series
8 Bits
74LVC373 family
20 pin count
20 pins
3.3V power supplies
SN74LVC373ADBR Applications
There are a lot of Texas Instruments SN74LVC373ADBR Latches applications.
- Network Switches
- Four-bit storage with output enable
- Storage
- Phase comparator
- Counter control
- TV Set-top Boxes
- Avionics
- A/D and D/A conversion
- Display
- Bus system register with enable parallel lines at bus side
