SN74LVC373ADBRE4
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Pin Count | 20 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
SN74LVC373ADBRE4 Overview
In the SSOP package, it is embedded. A Tape and Reel package is used to package it. The electronic part in this image has 8 bits. A device such as this has 20 terminations designed. The device is operated when the supply voltage is set to 1.8V. There are 20 pins attached to it. It is a member of the LVC/LCX/Z family of electronic devices. The pin configuration of the device is 20. Mounting this electronic component follows the Surface Mount method. In this device, there is a total of 2 ports available for use. This part can be found within the FF/Latches subcategory. The system is powered by 3.3V sources. The superior flexibility of this circuit can be attributed to the use of 8 circuits. There is 24mA low level output current set. In the high level output current, the value is set to -24mA. Lower than 85°C is the ideal operating temperature. There should be a temperature above -40°C at which the device operates. The maximum supply voltage is 3.6V. With a minimum supply voltage of 1.65V, it operates. The logic IC it adopts is BUS DRIVER. Its output current of 24mA ensures maximum design flexibility.
SN74LVC373ADBRE4 Features
SSOP package
8 Bits
20 pin count
20 pins
3.3V power supplies
SN74LVC373ADBRE4 Applications
There are a lot of Texas Instruments SN74LVC373ADBRE4 Latches applications.
- Instrumentation
- Lamp and Display (LED)
- Communication systems
- Automotive ADAS
- PCs and Notebooks
- Synchronous frequency dividers
- Ring counter
- TV Set-top Boxes
- Up/down difference counting
- Shift right with parallel loading
