banner_page

SN74LVC373ADW

D-Type, Flip-Flop, Latch 1.65V~3.6V 8 Bits Tri-State Latches 74LVC Series 74LVC373 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LVC373ADW
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 149
  • Description: D-Type, Flip-Flop, Latch 1.65V~3.6V 8 Bits Tri-State Latches 74LVC Series 74LVC373 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74LVC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 1.65V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.8V
Base Part Number 74LVC373
Pin Count 20
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 3.6V
Power Supplies 3.3V
Load Capacitance 50pF
Number of Ports 2
Nominal Supply Current 10μA
Output Current 24mA
Number of Bits 8
Propagation Delay 6.8 ns
Turn On Delay Time 1.5 ns
Family LVC/LCX/Z
Logic Function D-Type, Flip-Flop, Latch
Output Characteristics 3-STATE
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Number of Gates 8
Control Type ENABLE LOW
Number of Input Lines 9
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 2.65mm
Length 12.8mm
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74LVC373ADW Overview


In the 20-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. A Tube package is used to package it. It uses Tri-State as the output. There is a logic type of D-Type Transparent Latch for this electrical device. According to Surface Mount, this electronic part is mounted. A 1.65V~3.6V voltage supply is required for operation. A temperature of -40°C~85°C is used for operation. 74LVC is the series number of this FPGA. It is designed with 8 bits. A device with this design has 20 terminations. The family 74LVC373 includes it. The supply voltage of the device is 1.8V. It has 20 pins that makes it easy to use. LVC/LCX/Z is the family name of this electronic device. In addition, it is designed with a pin number of 20. The electronic part is mounted using the Surface Mount method. As far as ports are concerned, this device has 2 ports. The part is in the FF/Latches subcategory. There is a maximum voltage supply (Vsup) that reaches 3.6V. There are 3.3V power supplies attached to it. Electronic circuits comprise 9 input lines. As the output current is 24mA, the design flexibility is maximum.

SN74LVC373ADW Features


20-SOIC (0.295, 7.50mm Width) package
74LVC series
8 Bits
74LVC373 family
20 pin count
20 pins
3.3V power supplies

SN74LVC373ADW Applications


There are a lot of Texas Instruments SN74LVC373ADW Latches applications.

  • BCD counting
  • Motor Drives
  • Up-Down Johnson
  • Pattern generators
  • Bus system register with enable parallel lines at bus side
  • Clocks
  • Automotive Body Electronics
  • Parallel data storage
  • Decade counting 7-segment decimal display
  • Sample and hold register

Write a review

Note: HTML is not translated!
    Bad           Good