banner_page

SN74LVC373ADWR

D-Type, Latch 1.65V~3.6V 8 Bits Tri-State Latches 74LVC Series 74LVC373 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LVC373ADWR
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 436
  • Description: D-Type, Latch 1.65V~3.6V 8 Bits Tri-State Latches 74LVC Series 74LVC373 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74LVC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 1.65V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.8V
Base Part Number 74LVC373
Pin Count 20
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 3.6V
Power Supplies 3.3V
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 8
Propagation Delay 6.8 ns
Quiescent Current 10μA
Turn On Delay Time 1.5 ns
Family LVC/LCX/Z
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW
Number of Input Lines 2
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 2.65mm
Length 12.8mm
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No

SN74LVC373ADWR Overview


In the 20-SOIC (0.295, 7.50mm Width) package, it is embedded. This package has the format of Tape & Reel (TR). In this configuration, the output is set to Tri-State. There is D-Type Transparent Latch logic type for this electrical device. Electronic components are mounted using the Surface Mount method. In order for it to operate, it needs a supply voltage of 1.65V~3.6V. There is a temperature of -40°C~85°C at which the system operates. An FPGA of this type belongs to the 74LVC series. The design of this electronic part is based on 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It belongs to 74LVC373 family. The device works with a voltage of 1.8V for its supply voltage. The 20 pind are equipped with it. In the world of electronics, this electronic device belongs to the family of LVC/LCX/Z. It is designed with 20 pins. It is mounted according to the Surface Mount method. In this device, there are 2 ports. This part is included in FF/Latches. The maximal supply voltage (Vsup) reaches 3.6V. A total of 3.3V power supplies are needed to run it. There are 2 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. As a result of its reliable performance, it is well suited for TR. With 24mA, maximum design flexibility is ensured. The quiescent current consumed by it is 10μA because it is unaffected by external factors.

SN74LVC373ADWR Features


20-SOIC (0.295, 7.50mm Width) package
74LVC series
8 Bits
74LVC373 family
20 pin count
20 pins
3.3V power supplies

SN74LVC373ADWR Applications


There are a lot of Texas Instruments SN74LVC373ADWR Latches applications.

  • Pattern Generators
  • Up/down difference counting
  • TV Set-top Boxes
  • Hammer Device Information
  • Automatic test equipment
  • Multi-line decoders
  • Registers
  • Shift left with parallel loading
  • Four-bit storage with output enable
  • Serial Output Data Queuing

Write a review

Note: HTML is not translated!
    Bad           Good