banner_page

SN74LVC373ANSR

D-Type, Latch 1.65V~3.6V 8 Bits Tri-State Latches 74LVC Series 74LVC373 20 Pins DUAL CMOS 20-SOIC (0.209, 5.30mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LVC373ANSR
  • Package: 20-SOIC (0.209, 5.30mm Width)
  • Datasheet: -
  • Stock: 330
  • Description: D-Type, Latch 1.65V~3.6V 8 Bits Tri-State Latches 74LVC Series 74LVC373 20 Pins DUAL CMOS 20-SOIC (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.209, 5.30mm Width)
Number of Pins 20
Weight 266.712314mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74LVC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 1.65V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.8V
Base Part Number 74LVC373
Pin Count 20
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 3.6V
Power Supplies 3.3V
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 8
Propagation Delay 8.7 ns
Turn On Delay Time 1.5 ns
Family LVC/LCX/Z
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Control Type ENABLE LOW
Number of Input Lines 8
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 2mm
Length 12.6mm
Width 5.3mm
Thickness 1.95mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74LVC373ANSR Overview


The package in which it is embedded is named 20-SOIC (0.209, 5.30mm Width). Tape & Reel (TR) is the way it is packaged. It uses Tri-State as its output configuration. This electrical device has a logic type of D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. A voltage of 1.65V~3.6V is used as the supply voltage for this device. There is -40°C~85°C operating temperature. In the 74LVC series, this FPGA is located. It is designed with 8 bits. A device such as this has 20 terminations designed. The family in which it belongs to is 74LVC373. In order to function, the supply voltage should be set to 1.8V. It has 20 pins that makes it easy to use. It is a member of the LVC/LCX/Z family of electronic devices. The pin configuration of the device is 20. Surface Mount is used to mount this electronic part. In this device, there is a total of 2 ports available for use. In the subcategory FF/Latches, this part belongs. When Vsup reaches 3.6V, the maximal supply voltage is reached. The device is powered by 3.3V power supplies. There are electronic circuits attached to the 8 input lines. Based on its reliable performance, this device is appropriate for TR. The output current of 24mA makes it feature maximum design flexibility.

SN74LVC373ANSR Features


20-SOIC (0.209, 5.30mm Width) package
74LVC series
8 Bits
74LVC373 family
20 pin count
20 pins
3.3V power supplies

SN74LVC373ANSR Applications


There are a lot of Texas Instruments SN74LVC373ANSR Latches applications.

  • Parallel data synchronization
  • Sample and hold register
  • Frequency dividing
  • Programmable binary
  • Stacked or Push-Down Registers
  • Hammer
  • Address register
  • Counter control
  • Audio and video switching
  • Automotive Infotainment

Write a review

Note: HTML is not translated!
    Bad           Good