SN74LVC373ANSRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 8.7 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW/HIGH |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC373ANSRG4 Overview
Package 20-SOIC (0.209, 5.30mm Width) includes it. Tape & Reel (TR) is the way it is packaged. It uses Tri-State as the output. D-Type Transparent Latch is the logic type of this electrical device. A Surface Mount mount is used for mounting this electronic part. It operates at a voltage of 1.65V~3.6V. It is -40°C~85°C at the operating temperature. It is a type of FPGA belonging to the 74LVC series. Electronic parts with 8 bits are designed for this application. In this device, there are 20 terminations that have been designed. As a member of the 74LVC373 family, it falls under that category. It operates with a supply voltage of 1.8V. The 20 pind are equipped with it. In terms of electronic devices, this one is in the LVC/LCX/Z family. The 20 pins are designed into it. Mounting this electronic component follows the Surface Mount method. In this device, there are 2 ports. In the subcategory FF/Latches, this part belongs. It is possible to reach 3.6V when the maximum supply voltage (Vsup) has been reached. It operates from 3.3V power supplies. The reliability of this device makes it well suited to TR. With an output current of 24mA, it is highly flexible in terms of design. There are no external factors that affect it, so it consumes 10μA quiescent current. Its superior flexibility is achieved by using 8 circuits.
SN74LVC373ANSRG4 Features
20-SOIC (0.209, 5.30mm Width) package
74LVC series
8 Bits
74LVC373 family
20 pin count
20 pins
3.3V power supplies
SN74LVC373ANSRG4 Applications
There are a lot of Texas Instruments SN74LVC373ANSRG4 Latches applications.
- Serial Output Data Queuing
- Hammer Device Information
- Display driver
- High-speed logic
- Data acquisition
- Up/down difference counting
- Digital bus buffer
- Automatic test equipment
- Programmable binary
- Bus system register with enable parallel lines at bus side
