SN74LVC373APWT
| Parameters | |
|---|---|
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 6.8 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
SN74LVC373APWT Overview
A package called 20-TSSOP (0.173, 4.40mm Width) contains it. The package is in the form of Tape & Reel (TR). It is configured with an output of Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. Surface Mount is used to mount this electronic part. The supply voltage of the device is 1.65V~3.6V. The operating temperature is -40°C~85°C. An FPGA in this series belongs to the 74LVC family. The design of this electronic part contains 8 bits. In this device, there are 20 terminations. It is a member of the 74LVC373 family. A 1.8V voltage supply is required for operation. With 20 pins, it is equipped. It is a member of the LVC/LCX/Z family of electronic devices. Designed with 20 pins, it is compatible with a wide range of devices. Mounting this electronic component follows the Surface Mount method. This device has a total of 2 ports. There is a subcategory of FF/Latches for this part. When Vsup reaches 3.6V, the maximal supply voltage is reached. A total of 3.3V power supplies are needed to run it. It consists of 8 input lines from which an electronic circuit can be built. On the basis of its reliability, this device is well suited for TR. The output current of 24mA makes it feature maximum design flexibility.
SN74LVC373APWT Features
20-TSSOP (0.173, 4.40mm Width) package
74LVC series
8 Bits
74LVC373 family
20 pin count
20 pins
3.3V power supplies
SN74LVC373APWT Applications
There are a lot of Texas Instruments SN74LVC373APWT Latches applications.
- Serial Input
- Timers
- Automatic test equipment
- TV Set-top Boxes
- A/D and D/A conversion
- Four-bit storage with output enable
- Parallel Input
- Parallel data synchronization
- Shift register
- Sample and hold register
