SN74LVC373AQDWREP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Output Lines | 8 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LVC373AQDWREP Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. Tape & Reel (TR) is the way in which it is packaged. It is configured with an output of Tri-State. D-Type Transparent Latch is the logic type of this electrical device. Based on the way of Surface Mount, this electronic part is mounted. A 1.65V~3.6V voltage supply is required for operation. A temperature of -40°C~125°C is set as the operating temperature. It is a type of FPGA belonging to the 74LVC series. The electronic part in this image has 8 bits. In this device, there are 20 terminations. It belongs to 74LVC373 family. In order to function, the supply voltage should be set to 2.7V. With 20 pins, it is equipped. This electronic device belongs to the family of LVC/LCX/Z. In addition, it is designed with a pin number of 20. Surface Mount is the method used for mounting this electronic part. In this device, there are 2 ports. It belongs to the subcategory of FF/Latches. 3.6V is the maximum supply voltage (Vsup). There are 3.3V power supplies attached to it. (Vsup) should be greater than 2V. The reliability of this device makes it well suited to TAPE AND REEL. The output current of 24mA makes it feature maximum design flexibility. Input lines are converted into binary equivalents by 8 output lines. A total of 1 elements make up this object.
SN74LVC373AQDWREP Features
20-SOIC (0.295, 7.50mm Width) package
74LVC series
8 Bits
74LVC373 family
20 pin count
20 pins
3.3V power supplies
1 elements
SN74LVC373AQDWREP Applications
There are a lot of Texas Instruments SN74LVC373AQDWREP Latches applications.
- Decade counting
- Up-Down Johnson
- Timers
- Lamp and Display (LED)
- Serial Input
- Display
- Phase comparator
- Network Switches
- Automotive Body Electronics
- Programmable binary
