SN74LVC373AQPWREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW/HIGH |
| Number of Output Lines | 8 |
| Translation | N/A |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC373AQPWREP Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, it is embedded. It is packaged in the way of Tape & Reel (TR). It uses Tri-State as the output. This electrical device has a logic type of D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. A 1.65V~3.6V supply voltage is required to operate it. The operating temperature is -40°C~125°C. An FPGA of this type belongs to the 74LVC series. It is designed with 8 bits. A device such as this has 20 terminations designed. The family in which it belongs to is 74LVC373. The device is operated when the supply voltage is set to 2.7V. With 20 pins, it is equipped. It is a member of the LVC/LCX/Z family of electronic devices. Designed with 20 pins, it is compatible with a wide range of devices. A Surface Mount mounting method has been used for this electronic part. This device has 2 ports. There is a subcategory of FF/Latches for this part. There is a maximum voltage supply (Vsup) that reaches 3.6V. The system is powered by 3.3V sources. A supply voltage (Vsup) greater than 2V is required. Based on its reliable performance, this device is well suited to TR. 8 output lines generate the binary equivalent of the input lines. A total of 1 elements make up this object.
SN74LVC373AQPWREP Features
20-TSSOP (0.173, 4.40mm Width) package
74LVC series
8 Bits
74LVC373 family
20 pin count
20 pins
3.3V power supplies
1 elements
SN74LVC373AQPWREP Applications
There are a lot of Texas Instruments SN74LVC373AQPWREP Latches applications.
- Hammer Device Information
- Shift Registers
- Frequency dividing
- Counter control
- Counter timers
- Pattern generators
- TV Set-top Boxes
- Buffer register
- Automatic test equipment
- Digital bus buffer
