Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Weight |
76.997305mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100, 74LVC |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
1.65V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
2.7V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74LVC373 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Number of Elements |
1 |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
3.3V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
7.5 ns |
Turn On Delay Time |
1.5 ns |
Family |
LVC/LCX/Z |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
Number of Output Lines |
8 |
Length |
6.5mm |
Width |
4.4mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
SN74LVC373AQPWRQ1 Overview
In the package 20-TSSOP (0.173, 4.40mm Width), it can be found. As a result, it has a packaging of Tape & Reel (TR). It uses Tri-State as the output. There is a logic type of D-Type Transparent Latch for this electrical device. The electronic component is mounted according to the Surface Mount method. It operates with a supply voltage of 1.65V~3.6V. A temperature of -40°C~125°C is used for operation. An FPGA of this type belongs to the Automotive, AEC-Q100, 74LVC series. With this electronic part, there are 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There is no doubt that it belongs to the family 74LVC373. In order to function, the supply voltage should be set to 2.7V. The device is equipped with 20 pins. There is a device in this electronic family called LVC/LCX/Z. There are 20 pins on it. The electronic part is mounted using the Surface Mount method. This device has 2 ports that can be connected to it. Subcategory FF/Latches includes this part. During this period, the maximum supply voltage (Vsup) reaches 3.6V. There are 3.3V power supplies required for this machine to operate. It is recommended to have a higher supply voltage (Vsup) than 2V. This device is well suited for TR based on its reliable performance. Input lines are generated as binary equivalents by 8 output lines. A total of 1 elements are contained in it.
SN74LVC373AQPWRQ1 Features
20-TSSOP (0.173, 4.40mm Width) package
Automotive, AEC-Q100, 74LVC series
8 Bits
74LVC373 family
20 pin count
20 pins
3.3V power supplies
1 elements
SN74LVC373AQPWRQ1 Applications
There are a lot of Texas Instruments SN74LVC373AQPWRQ1 Latches applications.
- Shift Registers
- Hammer Device Information
- Parallel Output
- BCD counting
- Audio and video switching
- A/D converters
- Shift right register
- Automotive ADAS
- Lamp and Display (LED)
- TV Set-top Boxes