SN74LVC374ADBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 100MHz |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 7ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 2 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC374ADBR Overview
20-SSOP (0.209, 5.30mm Width)is the packaging method. A package named Tape & Reel (TR)includes it. Tri-State, Non-Invertedis the output configured for it. It is configured with the trigger Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 1.65V~3.6Vis used as the supply voltage. It is operating at a temperature of -40°C~85°C TA. It belongs to the type D-Typeof flip flops. The FPGA belongs to the 74LVC series. In order for it to function properly, its output frequency should not exceed 100MHz. The list contains 1 elements. There is 10μA quiescent consumption. Currently, there are 20 terminations. Members of the 74LVC374family make up this object. The D flip flop is powered by a voltage of 1.8V . Its input capacitance is 4pF farads. In this case, the D flip flop belongs to the LVC/LCX/Zfamily. In this case, the electronic component is mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device has the clock edge trigger type of Positive Edge. It is included in FF/Latches. It is designed with a number of bits of 8. The maximal supply voltage (Vsup) reaches 3.6V. 8 circuits are used to achieve its superior flexibility. A reliable performance of this D flip flop makes it well suited for use in TR. The system runs on a power supply of 3.3V watts. A total of 2ports are embedded in the D flip flop. Its output current of 24mAallows for maximum design flexibility. The number of input lines is 2.
SN74LVC374ADBR Features
Tape & Reel (TR) package
74LVC series
20 pins
8 Bits
3.3V power supplies
SN74LVC374ADBR Applications
There are a lot of Texas Instruments SN74LVC374ADBR Flip Flops applications.
- Buffered Clock
- Registers
- Data storage
- Memory
- Computing
- Storage Registers
- Parallel data storage
- Synchronous counter
- Single Down Count-Control Line
- Frequency Dividers
