SN74LVC374ADGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 60.186038mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 100MHz |
| Propagation Delay | 8.1 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 7ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 2 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC374ADGVR Overview
As a result, it is packaged as 20-TFSOP (0.173, 4.40mm Width). A package named Cut Tape (CT)includes it. There is a Tri-State, Non-Invertedoutput configured with it. The trigger it is configured with uses Positive Edge. Surface Mountmounts this electrical part. It operates with a supply voltage of 1.65V~3.6V. -40°C~85°C TAis the operating temperature. This D latch has the type D-Type. In this case, it is a type of FPGA belonging to the 74LVC series. You should not exceed 100MHzin its output frequency. In total, it contains 1 elements. There is a consumption of 10μAof quiescent energy. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Members of the 74LVC374family make up this object. It is powered by a voltage of 1.8V . A JK flip flop with a 4pFfarad input capacitance is used here. It belongs to the family of electronic devices known as LVC/LCX/Z. This electronic part is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. This device has the base part number Bus Driver/Transceiver. There are 8bits in its design. The maximal supply voltage (Vsup) reaches 3.6V. Using 8 circuits, it is highly flexible. This D flip flop is well suited for TR based on its reliable performance. The system runs on a power supply of 3.3V watts. The flip flop contains 2ports. As a result of its output current of 24mA, it is very flexible in terms of design. Currently, there are 2 lines of input.
SN74LVC374ADGVR Features
Cut Tape (CT) package
74LVC series
20 pins
8 Bits
3.3V power supplies
SN74LVC374ADGVR Applications
There are a lot of Texas Instruments SN74LVC374ADGVR Flip Flops applications.
- Modulo – n – counter
- Latch
- Buffered Clock
- ESCC
- EMI reduction circuitry
- Computers
- Automotive
- Frequency division
- Count Modes
- CMOS Process
