SN74LVC374ADW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 100MHz |
| Propagation Delay | 8.1 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 7ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 2 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC374ADW Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. It is contained within the Tubepackage. T flip flop is configured with an output of Tri-State, Non-Inverted. This trigger uses the value Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A 1.65V~3.6Vsupply voltage is required for it to operate. Temperature is set to -40°C~85°C TA. This D latch has the type D-Type. It belongs to the 74LVCseries of FPGAs. It should not exceed 100MHzin terms of its output frequency. In total, it contains 1 elements. It consumes 10μA of quiescent current without being affected by external factors. 20terminations have occurred. This D latch belongs to the family of 74LVC374. The power supply voltage is 1.8V. There is 4pF input capacitance for this T flip flop. It is a member of the LVC/LCX/Zfamily of D flip flop. There is an electronic component mounted in the way of Surface Mount. It is designed with 20 pins. The clock edge trigger type for this device is Positive Edge. It is included in Bus Driver/Transceiver. An electronic part with 8bits has been designed. There is a 3.6Vmaximum supply voltage (Vsup). In order to achieve its superior flexibility, 8 circuits are used. An electrical current of 3.3V volts is applied to it. The flip flop has 2ports embedded within it. It offers maximum design flexibility with its output current of 24mA. A total of 2input lines have been provided.
SN74LVC374ADW Features
Tube package
74LVC series
20 pins
8 Bits
3.3V power supplies
SN74LVC374ADW Applications
There are a lot of Texas Instruments SN74LVC374ADW Flip Flops applications.
- Count Modes
- Functionally equivalent to the MC10/100EL29
- Balanced Propagation Delays
- Common Clocks
- Control circuits
- ESD protection
- Frequency division
- Shift registers
- Load Control
- Data transfer
