SN74LVC374AN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 100MHz |
| Propagation Delay | 8.1 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 7ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 2 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC374AN Overview
As a result, it is packaged as 20-DIP (0.300, 7.62mm). The Tubepackage contains it. As configured, the output uses Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. There is an electronic component mounted in the way of Through Hole. The JK flip flop operates at 1.65V~3.6Vvolts. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This logic flip flop is classified as type D-Type. This type of FPGA is a part of the 74LVC series. You should not exceed 100MHzin the output frequency of the device. A total of 1 elements are present. T flip flop consumes 10μA quiescent energy. There have been 20 terminations. The object belongs to the 74LVC374 family. It is powered from a supply voltage of 1.8V. Input capacitance of this device is 4pF farads. Electronic devices of this type belong to the LVC/LCX/Zfamily. It is mounted by the way of Through Hole. This board has 20 pins. This device has the clock edge trigger type of Positive Edge. The part is included in FF/Latches. There are 8bits in this flip flop. The maximal supply voltage (Vsup) reaches 3.6V. Using 8 circuits, it is highly flexible. The D latch operates on 3.3V volts. The D flip flop has no ports embedded. It offers maximum design flexibility with its output current of 24mA. This input has 2lines in it.
SN74LVC374AN Features
Tube package
74LVC series
20 pins
8 Bits
3.3V power supplies
SN74LVC374AN Applications
There are a lot of Texas Instruments SN74LVC374AN Flip Flops applications.
- Divide a clock signal by 2 or 4
- Power down protection
- Test & Measurement
- ESD performance
- Shift Registers
- Asynchronous counter
- Frequency division
- CMOS Process
- Circuit Design
- Single Down Count-Control Line
