SN74LVC374ANSR
| Parameters | |
|---|---|
| Length | 12.6mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 100MHz |
| Propagation Delay | 8.1 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 7ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2mm |
SN74LVC374ANSR Overview
The item is packaged in 20-SOIC (0.209, 5.30mm Width)cases. D flip flop is included in the Tape & Reel (TR)package. T flip flop is configured with an output of Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. Surface Mountis occupied by this electronic component. A voltage of 1.65V~3.6Vis used as the supply voltage. It is operating at a temperature of -40°C~85°C TA. This logic flip flop is classified as type D-Type. The FPGA belongs to the 74LVC series. Its output frequency should not exceed 100MHz Hz. D latch consists of 1 elements. It consumes 10μA of quiescent The number of terminations is 20. It is a member of the 74LVC374 family. Power is supplied from a voltage of 1.8V volts. A 4pFfarad input capacitance is provided by this T flip flop. In terms of electronic devices, this device belongs to the LVC/LCX/Zfamily of devices. Electronic part Surface Mountis mounted in the way. This board is designed with 20pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The part you are looking for is included in FF/Latches. Flip flops designed with 8bits are used in this part. Using 8 circuits, it is highly flexible. As a result of its reliable performance, this T flip flop is suitable for TR. A D flip flop with 2embedded ports is available. With an output current of 24mA, this device offers maximum design flexibility. It is reported that there are 3 input lines.
SN74LVC374ANSR Features
Tape & Reel (TR) package
74LVC series
20 pins
8 Bits
SN74LVC374ANSR Applications
There are a lot of Texas Instruments SN74LVC374ANSR Flip Flops applications.
- High Performance Logic for test systems
- Dynamic threshold performance
- CMOS Process
- Memory
- Convert a momentary switch to a toggle switch
- Automotive
- ESCC
- Bus hold
- Circuit Design
- 2 – Bit synchronous counter
